3920
The things to remember are these:
Create a Virtual Bridge (trbrf)
Create a virtual Ring (trcrf)
Assign Physical ports to the rings you created
Assign IP address and enable IP by selecting Boot P when needed
**VERY IMPORTANT**
Ring numbers and Bridge numbers are entered into the switch in HEX, so make
sure you convert the decimal number to HEX before you enter it into the
switch.
Andy Cuberly
CCIE #8386
Router(config-if)# surce-bridge 0x16 1 0x55
!
wr t
interface TokenRing0/0
ring-speed 16
source-bridge 22 1 85
|